Home
About
Company Profile
Culture
Factory Appearance
Honor
News
Company News
Technical Forum
Industry News
Products
Butyl tin
Octyl tin
Tetrabutyltin
Four octyl tin
Contact
中文版
English
Russian
Arabic
Difference between T9 stannous octoate and T12 dibutyl tin dilaurate
Used as a catalyst for polyurethane synthesis and room temperature vulcanized silicone rubber. Also used as epoxy resin catalyst type curing agent, in the curing of stannous octoate than dibutyl tin dilaurate catalytic activity, if the two compound use, the effect is better than the use of separate, can take into account the reaction speed and curing speed. Because the divalent tin compounds are easily oxidized and decomposed by oxygen and water vapor in the air, they must be sealed for nitrogen protection during storage to avoid high temperature and excessive humidity to prevent activity decline or failure. T9 stannous octoate use: stannous octoate catalyst is polyurethane foam, especially the important catalyst in the production of polyurethane flexible foam. T9 stannous octoate, T12 dibutyltin dilaurate Details Parameters Product Details
27
2023
/
12
Polyurethane catalysts in multi-domain solutions
The T-12 (dibutyltin dilaurate) produced by the new materials is an organotin compound with a high boiling point. It is used as an efficient catalyst in the manufacture of polyurethane coatings, electroplating coatings, spraying, polyurethane foams, coatings, adhesives and sealants. Organic silicone rubber mold products, soft PVC plastic products, such as film, semi-rigid sheet, transparent hose and other production of heat stabilizer use. T-12 can be dissolved in all plasticizers, benzene, toluene, acetone and other organic solvents, insoluble in water, is a powerful catalyst. In addition, the T-12 catalyst produced by the new material is used in the manufacture of rigid foam polyurethane. Organometallic materials such as T-12 catalysts can produce a synergistic effect of increased activity with amino catalysts in applications where the use of amino catalysts alone exhibits insufficient catalytic action. It is therefore suitable for the production of rigid foams requiring high-speed catalysis. Even high-density structural foams, sprayed wall insulation and rigid plates are manufactured in high-speed production lines. The T-12 has a fast and efficient drying reaction in the time of rapid gel debonding. T-12 can be applied to one-component moisture-cured polyurethane coatings, two-component coatings, adhesives and sealing layers. Polyurethane drier for polyurethane rigid foam, semi-rigid foam, soft foam, high resilience foam, elastomers, sealants and other industries. The catalysts commonly used in the synthesis of polyurethane and its raw materials are mainly tertiary amine catalysts and organometallic compounds.